This project consisted of excavating and grading the existing topography to install a new parking lot. APC began by installing a compacted stone base for the new parking lot and the alley way behind the parking lot. An electrical conduit and concrete base for new lighting poles were installed, as well as drainage structures and drainage pipes. Some of the existing sidewalk was removed and replaced with new ADA compliant crosswalks. A concrete privacy wall with decorative limestone veneer was built along the perimeter of the lot facing Main Street. A wooden privacy fence was built along the remaining perimeter. APC installed an HMA Base course and HMA Surface course along with a monolithic concrete curb and gutter around the lot. APC added signs and striping to complete the construction of the lot.

• Client: New Albany Board of Public Works
• Architect/Engineer: HMB Professional Engineers, Inc.
• Builder/General Contractor: APC
• Expected Start and Finish Dates: June – September 2018

This project consists of earth regrading and building a concrete wall due to flooding issues. We also replaced the affected neighbors’ driveway and added stone and sod to complete the curb appeal after the job was completed.

• Client: MSD
• Architect/Engineer: Trautwein Engineering
• Builder/General Contractor: APC
• Budget: $200,000
• Expected Start and Finish Dates: March – May 2018

This project consists of removing the existing road and concrete bridge. We are installing a 10’ x 5’ precast concrete box culvert and pouring in place concrete wing walls and footers. We will then proceed with replacing the road with new asphalt and a guardrail.

• Client: Louisville Metro Public Works
• Architect/Engineer: QK4
• Builder/General Contractor: APC
• Budget: N/A
• Expected Start and Finish Dates: November 1st – November 15th 2017

This project consists of excavating the existing walkways and replacing them with a newly stamped concrete walking path, bench pads, and site furnishings.

• Client: Metro Parks & Recreation
• Architect/Engineer: Metro Parks & Recreation
• Builder/General Contractor: APC
• Budget: N/A
• Expected Start and Finish Dates: November 2nd – December 2nd, 2017

This project consists of furnishing and installing approximately 3,900’ of 5’ wide concrete sidewalk, curb ramps, concrete driveway aprons, selective paving, striping, storm, and sanitary sewers.

• Client: City of Jeffersonville
• Architect/Engineer: Jacobi, Toombs &Lanz Inc.
• Builder/General Contractor: APC
• Budget: $315,000
• Expected Start and Finish Dates: June 2017 to August 2017

This project consists of milling the vast majority of the parking lot to install new concrete curbs and pour new asphalt. We also striped all new asphalt and painted traffic control and handicap symbols.

• Client: Kroger
• Architect/Engineer: Heritage Engineering
• Builder/General Contractor: APC
• Budget: N/A
• Expected Start and Finish Dates: June 22nd 2017 to July 14th 2017

For this drainage improvement project, we began with clearing and excavating the existing broken down drainage ditch to install a new 6” wide concrete paved ‘V’ ditch. We are currently in the process of installing a new 12’ tall RediRock modular retaining wall system to repair the bank of the south fork of Beargrass Creek adjacent to Trevilian Way.

• Client:Louisville Metropolitan Sewer District
• Architect/Engineer: Louisville Metropolitan Sewer District
• Builder/General Contractor: APC
• Budget: $200,000
• Expected Start and Finish Dates: May 2017 (Expected) July 2017

This project included milling and repaving the existing asphalt pavement. We also removed and replaced the concrete sidewalks to redesign the street corner at Chestnut St and Wall St. We then created a curbed bump-out that swells out into the road to form a defined parking area for the nearby residents. This streetscape really enhanced the aesthetic and created a safe area for pedestrians and parked cars.

• Client: City of Jeffersonville
• Architect/Engineer: City of Jeffersonville
• Builder/General Contractor: APC
• Budget: $45,000
• Expected Start and Finish Dates: April 2017 to June 2017

For this new subdivision, we have done all concrete work including driveways, walkways, sidewalks, stairs, curbs, gutters, and drain pans. We created a detention base to collect and properly drain overflow stormwater. All of the roadways have been base paved by us and we will finish the paving process once all other construction on-site has finished, ensuring a long-lasting roadway.

• Client: Neace Ventures
• Architect/Engineer: John G. Brinkworth
• Builder/General Contractor: Neace Ventures
• Budget: $250,000
• Expected Start and Finish Dates: 2014  (Expected) Fall of 2018

The Town of Sellersburg had an emergency contract to replace a failing concrete drainage structure. For this drainage improvement project, we began with excavating the existing breaking down the roadway and old-style concrete culvert to install a brand new concrete box culvert. After excavating the site, we then regraded the drainage bank area to ensure proper water flow. The new culvert box is 10’ wide by 4’ tall and 60’ long. After placing the new culvert boxes we began to form and pour concrete wing walls on each end of the structure. We then added a rip-rap stone base and paved a new roadway.

• Client: Town of Sellersburg
• Architect/Engineer: Jacobi, Toombs & Lanz Inc.
• Builder/General Contractor: APC
• Budget: $120,000
• Expected Start and Finish Dates: May 25th → June 13th 2017